Citizen PPU-231 manual Specify before the GS k command

PPU-231 User’s Manual

GS H n

[Function]	Selecting of Printing Position of HRI Code
[Code]	<1D>H<48>H<n>
[Range]	{0 ≤ n ≤ 3} Data is described in Hex code.
[Outline]	Selecting printing position of HRI code in printing bar codes.
	• "n" means the followings.
		n (Hex)	Printing Position
		0	No printing
		1	Above the bar code
		2	Below the bar code
		3	Both above and below the bar code
	The HRI code refers to the bar code-turned characters so that you can read them.
[Caution]	The HRI code is printed in the font selected with GS f.
	Specify before the GS k command.
[Defult]	• The initial value of n is "0".
[See Also]	GS f
[Sample Program]			[Print Results]

LPRINT CHR$ (&H1B) + "3" + CHR$ (5) ;

LPRINT CHR$ (&H1D) + "h" + CHR$ (50) ;

LPRINT CHR$ (&H1D) + "H" + CHR$ (0) ;

GOSUB BC

LPRINT CHR$ (&H1D) + "H" + CHR$ (1) ;

GOSUB BC

LPRINT CHR$ (&H1D) + "H" + CHR$ (2) ;

GOSUB BC

LPRINT CHR$ (&H1D) + "H" + CHR$ (3) ;

GOSUB BC

END

BC :

LPRINT CHR$ (&H1D) + "k" ;

LPRINT CHR$ (4) ;

LPRINT "12" + CHR$ (0) ;

LPRINT CHR$ (&HA) ;

RETURN

74 CITIZEN