Citizen PPU-231 manual ESC c Parallel Interface Only

PPU-231 User’s Manual

ESC c	3 n					(Parallel Interface Only)
[Function]		Selecting the paper near end sensor valid for a paper end signal output
[Code]		<1B>H<63>H<33>H<n>
[Range]		0 ≤ n ≤255
[Outline]		This command selects at which paper near end sensor a paper end signal should be output.
		Each bit for n has the following meaning:
		Bit	Position		Value
				0		1
		0	Paper near end	Disabled		Enabled
		1∼7	Undefined
		This printer can only select one kind of paper end detection, a paper-near-end sensor. n is
		valid for the least significant bit (n0).
[Caution]		This command is valid only for the parallel interface.
[Default]		A default of n is what has been set with the DIP switch (DS2-1).
[Sample Program]
		LPRINT CHR$(&H1B);"c3";CHR$(0);
		.………When outputting the paper-end signal at the paper end
		LPRINT CHR$(&H1B);"c3";CHR$(1);
		…………When outputting the paper-end signal at the paper near end

ESC	c	4	n
[Function]			Selecting the paper near end sensor valid for print stop
[Code]			<1B>H<63>H<34>H<n>
[Range]			0 ≤ n ≤ 255
[Outline]			This command selects at which paper near end sensor printing should be stopped. Each bit
			for n has the following meaning:
			Bit	Position	Value
					0	1
			0	Paper near end	Disabled	Enabled
			1∼7	Undefined
			This printer can only select one kind of paper-end detection, a paper-near-end sensor. n is
			valid for the least significant bit (n0).
[Default]			A default of n is what has been set with the DIP switch (DS2-1).

[Sample Program]

LPRINT CHR$(&H1B);"c4";CHR$(0);

………When stopping printing at the paper end

LPRINT CHR$(&H1B);"c4";CHR$(1);

………When stopping printing at the paper near end

59 CITIZEN