ESC c 5 | n |
|
|
|
| |
[Function] |
| Enabling/Disabling Panel Switches | ||||
[Code] |
| <1B>H<63>H<35>H<n> | ||||
[Range] |
| {0 ≤ n ≤ FF} | Data is described in Hex code. | |||
[Outline] | Selecting the LF switch valid/invalid. | |||||
|
| • "n" is valid only in the lowest bit (n0). | ||||
|
| • "n" bit means the followings. | ||||
|
|
|
|
|
| |
|
| n0 |
| Condition |
| |
|
| 0 |
| LFSW valid. |
| |
|
| 1 |
| LFSW invalid. |
| |
[Caution] | When the panel switch is disabled with this command, the LF switch is disabled. | |||||
|
| Therefore, the paper cannot be fed by operating the LF switch. | ||||
[Default] | • The initial value of n is "0". | |||||
[Sample Program] |
|
|
|
| ||
|
| LPRINT CHR$ (&H1B) + "c5" + CHR$ (0) ; ………… When enabling the LF switch | ||||
|
| LPRINT CHR$ (&H1B) + "c5" + CHR$ (1) ; ………… When disabling the LF switch |
ESC d | n |
[Function] | Printing and Feeding the paper by n lines |
[Code] | <1B>H<64>H<n> |
[Range] | * {0 ≤ n ≤ FF} Data is described in Hex code. |
[Outline] | Prints data inside the buffer and feeds paper by n lines. |
| • Specified line does not remain. |
| • The beginning of the line is to be considered as the next printing start position. |
[Default] | • The initial value is not defined. |
[Sample Program]
LPRINT "AAAAA"
LPRINT CHR$ (&H1B) + "d" + CHR$ (2) ;
LPRINT "AAAAA" + CHR$ (&HA) ;
[Print Results]
60 | CITIZEN |