Basic Operations

2-ZONE Function

About the 2-ZONE function

The 2-ZONE function is a function that outputs separate sounds from the MAIN zone and SUB zone by simultaneously operating two sources in the one center unit, thereby allowing plural listeners to enjoy separate music sources.

The 2-ZONE function allows internal sources (radio, DVD, VISUAL) and external sources via CeNET connection (for example, CD changers) to be played respectively on MAIN zone and SUB zone. For examples of playback possibilities, see the section “Setting the 2-ZONE function”.

The sources of the MAIN zone are played back from the speakers of the vehicle side, and those of the SUB zone are from the headphone systems (WH100).

Sound volume control on the SUB zone is performed by the headphone system (WH-100).

Notes:

•Except DVD/VISUAL, the MAIN and SUB zones cannot simultaneously use sources inside this unit. Also, external equipment connected via CeNET cannot simultaneously be used.

•The ISR function cannot be operated when the 2- ZONE function is turned on.

•The Audio mode function cannot be set for the sources of the SUB zone.

•If any of following external equipment is connected, this function is disenabled. 5.1 channel surround decoder (DVC940).

2-ZONE indication

Icon color indicates ON/OFF

•OFF : blue

•ON : green

•When 2-ZONE function is turned ON, the main unit’s buttons operate to control the MAIN zone source, while the remote control unit’s buttons operate to control the SUB zone source.

2.To turn the 2-ZONE function OFF, either press the remote control unit’s [2-ZONE] button, or touch the [2ZONE] key on the main menu.

●Source switching when 2-ZONE function is

OFF

Radio ➜ DVD ➜ (CD changer) ➜ (DVD changer) ➜ (TV) ➜ VISUAL ➜ (iPod) ➜ Radio ...

●MAIN zone source switching when 2-ZONE function is ON:

English

manual Owner’s

•When an iPod is connected, the SUB zone switches to DVD mode.

•If SUB zone is set to VISUAL when 2-ZONE is ON, connecting an iPod will cause the 2-ZONE function to turn OFF.

Setting the 2-ZONE function

∗The factory default setting is “OFF”.

1.Hold the remote control unit’s [2-ZONE] button depressed (about 1 second) to turn the 2-ZONE function ON.

•The function can also be switched by touching and holding the main menu’s [2ZONE] key (about 1 second).

Press the main unit’s [SOURCE] button to switch sources. The order of switching is

Radio ➜ DVD ➜ (CD changer) ➜ (DVD changer) ➜ (TV) ➜ VISUAL ➜ (iPod) ➜ Radio ...

●SUB zone source switching when 2-ZONE function is ON:

Press the remote control unit’s [SOURCE] button to switch sources.

•When no iPod is connected, switching is DVD mode ➜ VISUAL mode

•When an iPod is connected, only the internal DVD can be played.

VRX756VD 29