5.1 ch Surround Decoder Operations
English
manual Owner’s
∗This function is available only when the MUSIC MODE is selected for Dolby PL II. For setup details, see “Selecting the Dolby PL II (Dolby Pro Logic II) type.”
Select the “ON” or “OFF”. “OFF” is the default value.
[DIMENSION]:Touch the key to make adjustments between 0 and 6. The default value is “3”.
[CENTER WIDTH]:Touch the key to make adjustments between 0 and 7. The default value is “3”.
●FILTERThis function is used to select filter frequencies that suit the speakers that are used.
∗This function is not available for speakers whose “SPEAKER SEL” setting is set to OFF.
This function can be set to the following four settings: 50 Hz, 80 Hz, 120 Hz or THRGH (through). “THRGH” is the default value.
[CENTER HPF]:This function can be set to the following three settings: 50 Hz, 80 Hz and 120 Hz. “120 Hz” is the default value.
[SURROUND HPF]:This function can be set to the following four settings: 50 Hz, 80 Hz, 120 Hz or THRGH (through). “THRGH” is the default value.
[SUB WOOFER LPF]:This function can be set to the following three settings: 50 Hz, 80 Hz and 120 Hz. “120 Hz” is the default value.
This function sets speaker output level.
∗This function is not available for speakers whose “SPEAKER SEL” setting is set to OFF.
range
This function adjusts the timing of the speakers so that they are synchronized with front speaker output.
∗This function is not available for speakers whose “SPEAKER SEL” setting is set to OFF.
Adjustments are made in the range 0 ms to 5 ms. The default value is “0 ms”.
[SURROUND SP]:Adjustments are made in the range 0 ms to
15ms. The default value is “0 ms”.
●DRCThis function sets the dynamic range compression.
∗This function is not available for speakers whose “SPEAKER SEL” setting is set to OFF.
∗The default value is “MAX”.
4.Touch the [RTN] key, [ESC] key, or press the [ADJ] button.
58 VRX756VD