English connectionmanual Installationand Wire
3. GENERAL CAUTIONS
1. Do not open the case. There are no user | 2. Use a soft, dry cloth to clean the case. Never |
serviceable parts inside. If you drop anything | use a rough cloth, thinner, benzine, or |
into the unit during installation, consult your | alcohol, etc. For tough dirt, apply a little cold |
dealer or an authorized CLARION service | or warm water to a soft cloth and wipe off the |
centre. | dirt gently. |
4. CAUTIONS ON INSTALLATION
1.Prepare all articles necessary for installing the main unit before starting.
2.This model is used with the liquid crystal panel slid forwards (shell loading system). On some types of cars, the liquid crystal panel may touch the dashboard or shift lever, in which case it cannot be installed. Check that the set will not hamper operation of the shift lever before choosing the place of installation.(Figure 2)
Dashboard
Shift lever | Shift lever |
| |
(check that it does not |
|
touch the LCD.) |
|
Figure 2
5.Use the enclosed screws for installation. Using other screws can cause damage. (Figure 4)
ChassisChassis
Damage
Max. 8 mm (M5 screw)
Figure 4
6.The source unit has mounting screw holes for NISSAN (N marks) and TOYOTA (T marks) vehicles.
T N T
3. Install the unit within 30° of the horizontal | N | T | N |
plane. (Figure 3) |
| Figure 5 |
|
|
|
|
Max. 30˚
Figure 3
4.If you have to do any work on the car body, such as drilling holes, consult your car dealer beforehand.
66 VRX756VD