8. DCP

The control panel can be detached to prevent theft. When detaching the control panel, store it in the DCP (DETACHABLE CONTROL PANEL) case to prevent scratches.

We recommend taking the DCP with you when leaving the car.

Removing the DCP

1.Press the [SOURCE] button for 1 second or longer to turn off the power.

CAUTION

Be sure to close the HOLD FLAP for safety when removing the DCP.

Attaching the DCP

1.Insert the right side of the DCP into the main unit.

2.Insert the left side of the DCP into the main unit.

English

manual Owner’s

 

[SOURCE] button

[FRONT OPEN] button

DCP

2.Deeply push in [FRONT OPEN] button to unlock the front panel.

∗If the front panel does not open fully, gently open it with your hand.

DCP

3.Pull the DCP toward you and remove it.

4.Close the HOLD FLAP.

HOLD FLAP

CAUTION

•The DCP can easily be damaged by shocks. After removing it, be careful not to drop it or subject it to strong shocks.

•If the front panel is kept open, the DCP may drop due to vibration of the car.

This results in damage to the DCP. So close the front panel or remove the DCP to store into the case.

•The connector connecting the source unit and the DCP is an extremely important part. Be careful not to damage it by pressing on it with fingernails, screwdrivers, etc.

•Remote control unit cannot be used when front panel is open.

Note:

•If the DCP is dirty, wipe off the dirt with a soft dry cloth only.

VRX756VD 19