DVD Video Player Operations
Changing DVD System Settings
Notes:
•If the SETUP operation is performed in the middle of DVD video play, the disc plays from the beginning.
•Various settings of the SETUP menu cannot be made with the remote control unit.
•N PS : The leftmost and rightmost areas of the screen are cut off.
Selecting the DVD SETUP menu
1.Touch the screen to show the menu screen.
2.Touch the [SUB] key to display the SUB menu.
3.Touch the [SETUP] key to display the DVD SETUP menu.
4.Touch the [z] key. Touch the [w] key to return to the previous menu.
5. Touch the [RTN] key ([ESC] key).
Setting up the screen size
Set up the screen size according to the rear view monitor which is connected to this unit.
1.Follow the steps 1 to 3 in “Selecting the DVD SETUP menu”.
2.Each time you touch the [TV DISPLAY] key, you can change amoung the screen size in the following order.
“WIDE” ➞ “N PS” ➞ “N LB” ➞ “WIDE”∗ The factory default setting is “WIDE”.
This function allows displaying the important part of image fully on the screen. In some cases, image is displayed while being panned (scrolled).
•N LB : A black zone is created in the top and bottom areas of the screen.
This method displays Cinema Scope and Vista Vision images without cutting them off by creating a black zone on the top and bottom gaps.
●When watching through a wide type of the rear view monitor (16:9)•WIDE:3. Touch the [RTN] key ([ESC] key).
Setting up the angle mark display
You can set up so that the angle mark appears on scenes where the angles can be switched.
1.Follow the steps 1 to 3 in “Selecting the DVD SETUP menu”.
2.Touch the [ANGLE] key to select “ON” or “OFF”.
∗ The factory default setting is “OFF”.
3.Touch the [RTN] key ([ESC] key).
Setting up the disc menu language.
1.Following the steps 1 to 3 in “Selecting the DVD SETUP menu”, touch the [MENU LANGUAGE] key.
English
manual Owner’s
VRX756VD 33