Basic Operations
Adjusting the MONITOR | 1. When the panel is open, press the [ADJ] |
| button to display the ADJUST MODE menu. |
|
English
Adjusting the brightness and tone of color
Notes:
•This function is not available when the display is stored.
•The HUE setting can be adjusted only when the NTSC mode is selected.
•Switch to the VISUAL/DVD player(DVD video or video CD)/DVD changer/TV mode you see.
1.Press the [ADJ] button to switch to the ADJUST MODE menu.
2.Touch the [MONITOR] key.
3.Touch the [MONI ADJ] key to display
[BRIGHT], [HUE] and [COLOR] key. Touch the [BRIGHT], [HUE] and [COLOR] key to adjust BRIGHT, HUE and COLOR.
●“BRIGHT”:Adjust the brightness of the display.
●“HUE”:Adjust the tone of color (red is emphasized or green is emphasized)
•This operation is available only when the car is stopped and the parking brake is applied.
2.Touch the [MONITOR] key, and touch the
[DIMMER LEVEL] key to adjust the dimmer level.
3.Touch the [Î] or [Å] key to adjust.
4.Touch the [RTN] key, [ESC] key, or press the [ADJ] button.
Warning display when CCD camera is installed
When a TV tuner (sold separately) is installed together with optional CCD camera, the following warning message is displayed during use of the CCD camera: “Make sure of safety around your vehicle”
∗The factory default setting is “ON” 1. Press the [ADJ] button.
2.Touch the [MONITOR] key, and touch the [CCD WARNING] key to switch between “ON” and “OFF”.
3.Touch the [RTN] key, [ESC] key, or press the [ADJ] button.
manual Owner’s
Adjust the color saturation.
•This operation is available only when the car is stopped and the parking brake is applied.
4.Operate the touch key to adjust a level.
● “BRIGHT”:[Î] Press to make image brighter
[Å] Press to make image dimmer
● “HUE”:[Î] Press to increase green
[Å] Press to increase red
● “COLOR”:[Î] Press to increase color depth
[Å] Press to decrease color depth
5.Touch the [RTN] key, [ESC] key, or press the [ADJ] button.
Adjusting the dimmer level
Use to adjust panel brightness when car lights are ON/OFF.
●The factory default:When the car light is off: Brightest setting (58 steps)
When the car light is on: Medium brightness (29 steps)
Switching the VTR system between NTSC and PAL
∗This function is enabled only when the panel is open.
∗The factory default setting is “NTSC” for the
Switch to the VISUAL/VTR in TV mode you use.
1.Press the [ADJ] button to switch to the ADJUST MODE menu.
2.Touch the [MONITOR] key.
3.Touch the [NTSC/PAL] key to select “NTSC” or “PAL”.
4.Touch the [RTN] key, [ESC] key, or press the [ADJ] button.
Front monitor lock
1.Press and hold the [ADJ] button for 1 second or longer.
2.Press the [SOURCE] button to select the desired mode.
3.To cancel the monitor lock, press the [ADJ] button.
The screen shows the image of the selected mode.
VRX756VD 27