English

manual Owner’s

5.1 ch Surround Decoder Operations

Setting and storing P.EQ Properties

Output adjustment of subwoofer volume,

1.

Press the [ADJ] button and touch the

center volume and balance/fader

 

[AUDIO] key.

1. Press the [ADJ] button and touch the

2.

Touch the [P.EQ] key to show the P.EQ

[AUDIO] key.

 

adjusting display.

Touch the [DETAIL] key.

3. Touch the key for the desirable type to select it.

2. To make an adjustment on :

 

 

 

The P.EQ adjustment contents are as

● Subwoofer volume adjustment

 

follows:

 

2-1. Touch the [SUBWOOFER VOL] key to

 

● SIGNAL

 

adjust to desirable level.

 

∗ The factory default setting is “P.NOISE”.

 

∗ The factory default setting is “0”. (Setting

 

This function selects “P. NOISE” or “MUSIC”.

 

range : –6 to 3)

 

● SPEAKER SELECT● Center volume adjustment

 

∗ The factory default setting is “FRONT”.

2-1. Touch the [CENTER VOL] key to adjust to

 

This function selects “FRONT”, “CENTER” or

desirable level.

 

“SURROUND”.

∗ The factory default is “0”. (Setting range : –6

● BAND

to 0)

● Balance/Fader adjustment

∗ The factory default setting is “BAND1”.

 

Select the channel to be compensated (“BAND1”, “BAND2”, “BAND3”).

●FREQUENCY

∗The factory default setting is “1 kHz”.

Select the center frequency that you want to compensate from the range of 18 Hz to 20 kHz. (1/3 octave step, 31 points)

●Q

∗The factory default setting is “1”.

Set the sharpness of the Q-curve to one of the parameters: 1, 3, 5, 7 and 20.

●GAIN

∗The factory default setting is “0”.

Adjust the gain (output level) in the range of –6 dB to +6 dB. (1 dB step, 13 points)

4.Touch the [RTN] key, [ESC] key, or press the [ADJ] button.

2-1. Touch the [BAL/FAD] key.

Touch the [w] or [z] key to adjust the balance level.

[w] key : emphasized the sound from the front speakers.

[z] key : emphasized the sound from the rear speakers.

2-2. Touch the [Å] or [Î] key to adjust the fader level.

[Å] key : emphasized the sound from the left speakers.

[Î] key : emphasized the sound from the right speakers.

3.Touch the [RTN] key, [ESC] key, or press the [ADJ] button.

Selecting the Dolby PLII (Dolby Pro Logic II) type

∗ The factory default setting is “OFF”.

1.Press the [ADJ] button and touch the [AUDIO] key.

Touch the [Dolby PLII] key.

2.Touch the key for the desirable type to select it.

3.When the setting is finished, touch the [ESC] key or press the [ADJ] button to return to the previous mode.

60 VRX756VD