Basic Operations
English
manual Owner’s
Adjusting the MID
The MID gain, MID frequency (center frequency) and MID Q can be adjusted as follows.
1.Press the [ADJ] button, then touch the [AUDIO] key.
2.Touch the [MID] key.
3.When the bass type selection screen is displayed, touch the key for the desirable type to select it.
4.Touch the [w] or [z] key to adjust to desirable level.
GAIN :
FREQ. : 700Hz/1kHz/2kHz (The factory default setting is “1k”)
Q: 1.5/2 (The factory default setting is “2”)
5.Touch the [RTN] key, [ESC] key, or press the [ADJ] button.
3.Touch the [w] or [z] key to adjust to desirable level.
∗The factory default setting is “0”. (Setting range:
4.Touch the [RTN] key, [ESC] key, or press the [ADJ] button.
Turning on/off the MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust the low sound area like the normal sound adjustment function, but emphasizes the deep bass sound area to provide you with a dynamic sound.
1.Press the [ADJ] button, then touch the [AUDIO] key.
2.Thouch the [M•B EX] key.
Each time you touch the [M•B EX] key, you can switch between “ON” and “OFF”. When the MAGNA BASS EX effect is turned on, “M•B EX” lights in the display.
Adjusting the TREBLE
The treble gain and treble frequency (center frequency) can be adjusted as follows.
1.Press the [ADJ] button, then touch the [AUDIO] key.
2.Touch the [TREBLE] key.
3.When the bass type selection screen is displayed, touch the key for the desirable type to select it.
4.Touch the [w] or [z] key to adjust to desirable level.
GAIN :
FREQ. : 8kHz/12kHz (The Factory default setting is “12K”)
3.Touch the [RTN] key, [ESC] key, or press the [ADJ] button.
5.Touch the [RTN] key, [ESC] key, or press the [ADJ] button.
Adjusting the non fader output volume
You can adjust the volume output from the unit’s non fader output terminal.
1.Press the [ADJ] button, then touch the [AUDIO] key.
2.Touch the [NON FADER VOL] key.
26 VRX756VD