Radio Operations
FM reception
For enhanced FM performance the ® tuner includes signal actuated stereo control, Enhanced Multi AGC, Impulse noise reduction curcuits and Multipath noise reduction circuits.
Listening to the radio
1.Press the [SOURCE] button and select the Radio mode. The frequency is displayed.
2.Press the [BAND] button and select the radio band. Each time the button is pressed, the radio reception band changes in the following order:
FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...
3.Press the [a] or [d] button to tune in the desired station.
Seek tuning
1.Press the [BAND] button and select the desired band. (FM or AM)
2.Tune in to a station.
∗If “MANU” is lit in the display, press and hold the [BAND] button for 1 second or longer. “MANU” in the display goes off and seek tuning is now available.
∗The same operation is also available by using the [BAND] key.
1.Touch the [SRCH] key to switch the KEY PAD.
2.Touch the [0]~[9] key corresponding with the frequency you desired. When you touch the wrong number ([0]~[9] key), you can cancel that to touch the [CLR] key.
3.Touch the [ENT] key. The radio station you required would be tuned.
4.Touch the [ESC] key.
Manual tuning
There are 2 ways available: Quick tuning and step tuning.
When you are in the step tuning mode, the frequency changes one step at a time. In quick tuning mode, you can quickly tune the desired frequency.
1.Press the [BAND] button and select the desired band. (FM or AM)
∗If “MANU” is not lit in the display, press and hold the [BAND] button for 1 second or longer. “MANU” appears in the display and manual tuning is now available.
∗The same operation is also available by using the [BAND] key.
2.Tune into a station.
● Quick tuning:English
manual Owner’s
3.Press the [a] or [d] button to automatically seek a station.
When the [d] button is pressed, the station is sought in the direction of higher frequencies; when the [a] button is pressed, the station is sought in the direction of lower frequencies.
∗The same operation is also available by using the [å] or [∂] key.
Selecting stations with the KEY PAD
∗This function displays the KEY PAD on the screen enabling you to tune by entering a frequency.
Press and hold the [a] or [d] button for 1 second or longer to tune in a station.
●Step tuning:Press the [a] or [d] button to manually tune in a station.
Recalling a preset station
A total of 24 preset positions
There are 2 ways available to recall the preset station.
●Using the [DIRECT] button1.Press the [BAND] button and select the desired band. (FM or AM)
2.Press the corresponding [DIRECT] button to recall the stored station.
∗Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store that station into preset memory.
VRX756VD 31