Other Functions
Internal amplifier cancel function
This function is used to disable the internal amplifier when an external amplifier is connected.
∗The factory default setting is “OFF”.
1.Press the [ADJ] button.
2.Touch the [AUDIO EXT.] key.
3.Touch the [AMP CANCEL] key to select “ON” or “OFF”.
●OFF: Use with the internal amplifier.
●ON: Use with the external amplifier.
4.Touch the [ESC] key to return to the previous screen.
Triggered audio mute for cellular telepones
This unit requires special wiring to mute the audio signal automatically when a cellular telephone rings in the car.
∗This function is not compatible with all cellular telepones. Contact your local authorized Clarion dealer for information on proper installation and compatibility.
5.1ch Surround Decoder Operations
5.1 ch Surround Decoder control function
This function is available when a 5.1 ch Surround Decoder (DVH940) is connected.
When the 5.1 ch Surround Decoder (DVH940, sold separately) is CeNET connected, the 5.1 ch Surround Decoder Control unit (DVC940, sold separately) cannot be used.
This section describes operation procedures only.
For other details, refer to the owner’s manual supplied with the 5.1 ch Surround Decoder.
∗For details on functions of each mode, refer to the owner’s manual supplied with the DVH940.
∗Requires an optional amplifier sold separately.
Note:
•The
1.Press the [ADJ] button to show the ADJUST MODE menu.
2. Touch the [AUDIO EXT.] key.
3.Touch the required keys to make the desired setting.
●SPEAKER SEL (speaker selection)This function determines center speaker, surround speaker and sub woofer connection.
SP] or [SUB WOOFER] key to turn speakers on or off depending on what speakers are connected.
•The factory default setting is “ON”.
•The phase of the “SUB WOOFER” is reversed in the ON- setting. The default value is “ON+”.
English
manual Owner’s
VRX756VD 57