There are two other buttons that will allow you to check and save job log data for analysis of VC labels:
•View Log
•Copy Logs to Flash Drive
To copy or look at the log, you must have the Activate Job Log Data box checked. This screen also includes a box to allow the machine to boot up completely past Windows and open into the Clarity software. There is a Brightness Image Level that is set at the factory to
185.There is also a box called Display Options. These parameters should only be changed with input from Technical Support. Advanced screen functions are discussed in detail in Chapter 5.
The Technician Screen
Figure 3.8 – Technician Screen
When you select the Technician tab, a number keypad appears. Enter the password (082379) to allow entry into the screen. This screen contains a wide variety of features that will be useful in diagnostics. Contact Technical Support before making any changes to this screen.
This screen also contains a Focus Camera button that is used as a preliminary calibration of the camera focus to optimize the camera's ability to recognize clearly the edge of the lens. This, in turn, optimizes diameter checks and affects power readings.
Clarity User Guide, March 1, 2011 - Rev. 1.06 | Page 28 |
