•Hold your finger over the blinking X and when it stops blinking, remove your finger and the X will move to the upper right hand corner.
•Hold your finger over the blinking X and when it stops blinking, remove your finger and the X will move to the upper left hand corner.
•Hold your finger over the blinking X and when it stops blinking, remove your finger.
•The screen will then change to a blank screen with a progress bar box in the center.
•When the progress bar fills completely, the screen will return to the Calibration tab in the setup.
To exit back to the Job screen, select OK at the bottom of the screen and then on the next screen select Next.
Clarity User Guide, March 1, 2011 - Rev. 1.06 | Page 35 |
