Adding Cameras on the Internet

If the Network Camera you wish to add is not on your LAN, but is available via the Internet, click the Internet button. You will see a screen like the example below.

Figure 43: Add Camera from Internet

To associate a camera with the current Channel:

1.Enter the Camera Data on the panel on the right. See below for details.

2.If desired, click the Test button to check that a connection and login can be performed successfully. Note that if the remote LAN does not currently have an Internet connection, or the remote camera is not on-line, the test will fail because no connection is possible.

3.Click the Add button. The camera will now appear in the Channel List.

Camera Data - Internet

Local ID

Camera Name

IP Address

Port Number

This is the name you gave to this camera. This field must be entered.

This is the default name for the Network Camera, and cannot be changed.

This field will be displayed automatically once a connection to the Network Camera has been established.

Enter the Domain Name or Internet IP address of the desired Network Camera.

Enter the port number used by the Network Camera for connections via the Internet The Camera Administrator can advise you of the port to use. The default value is 1024.

61

Page 64
Image 64
CNET CIC-930W manual Adding Cameras on the Internet, Camera Data Internet, Local ID Camera Name IP Address Port Number