CNET CIC-930W manual Setup using the Windows Wizard, Setup Procedure

Setup using the Windows Wizard

Initial setup should be performed using the supplied Windows-based setup Wizard. This program can locate the Network Camera even if its IP address is invalid for your network. You can then configure the Network Camera with appropriate TCP/IP settings for your LAN.

Subsequent administration can be performed with your Web browser, as explained in Chapter 5 - Web-based Management.

Setup Procedure

1.Insert the supplied CD-ROM into your drive. If the setup program does not start automatically, run NeutralCamera.exe in the root folder.

•You will see the Welcome screen shown below.

•Click the Setup Camera button to start the setup Wizard

Figure 2: Welcome Screen

2. The next screen, shown below, will list all the Network Cameras on your LAN.

Figure 3: Camera List Screen

8