![](/images/new-backgrounds/1309468/30946863x1.webp)
Installation
Power Sources
Initial Battery Charge
Batteries and Charger
Initial Charge
The
1.Insert one (1) of the power cords into the back of the
2.Insert the other end of the power cord into the appropriate 12V DC or 220V AC power source.
3.Remove the spacer from the charger and insert the entire radio into the charger. The metal charge contacts on the radio will contact the mating prongs in the charger to transfer the charging current.
4.Observe that the red light on the front of the charger glows to indicate that the battery pack is properly seated and the charger is operating.
5.Allow the batteries to charge for three (3) to four (4) hours before use. The light will change back to green when the battery is fully charged.
WARNING
Only the rechargeable
NOTE
If the
Nothing Comes Close to a Cobra® 27