Operating Your Radio

VibrAlert® Tone Alert

Setup Mode Programming

VibrAlert® Mode

In VibrAlert® mode, your radio can alert you to incoming signals by sounding an audible call tone, a silent vibration or both.

To set VibrAlert®:

1.The display will show either the Vibrate icon (shake bars), Call Tone icon (bell shape) or a combination VibrAlert® icon.

2.The present setting of either, 01, 02 or 03 will be flashing.

3.Press Channel Up/Down button to select one of the following:

01 = VibrAlert® On (both shake bars and bell shape).

02 = Vibrate On (shake bars only).

03 = Call Tone Only On (bell shape only).

4.Press Call/Enter/Setup button to save this entry and move to the next setup programming mode.

Nothing Comes Close to a Cobra® 37

Page 42
Image 42
Cobra Electronics MR HH415LI VP EU owner manual VibrAlert Mode, To set VibrAlert