Cobra Electronics MR HH415LI VP EU owner manual To Enter Memory Location Scan

Operating Your Radio

MEM/ESC Button

SCAN Button

Advanced Operation

To Enter Memory Location Scan:

1.From Marine Standby mode, press the MEM/ESC button.

2.Press the SCAN button. The radio will immediately begin to scan all pre-assigned memory channels. The SCAN and MEM icons will show on the LCD.

3.A signal on any channel will stop the scan for 10 seconds to allow you to listen to the traffic on that location.

4.Press the Channel Up/Down button to resume scanning the Memory Location Scan channels or to change the scan direction.

5.To EXIT Memory Location Scan mode, press the SCAN button again. The SCAN and MEM icons will disappear from the LCD and the radio will return to Marine Standby mode.

Nothing Comes Close to a Cobra® 51