Rewind-Say-Again Feature | Cobra Electronics MR HH415LI VP EU

Operating Your Radio

Rewind-Say-Again™

REW Button

ET

52 English

Advanced Operation

Rewind-Say-Again™ Feature

Use the Cobra exclusive Rewind-Say-Again™feature to replay or record the last 20 seconds of an incoming audio transmission.

Example 1:

When engine noise, music or conversation creates too much noise to hear an inbound message clearly, press the REW button to hear the message a second time.

Example 2:

When listening to an urgent distress message of an excited caller with confusing background noise, press the REW button to hear the message a second time and get life saving information. Use this feature to record call details including position coordinates, call signs, registration numbers and store details that will help authorities locate the distressed vessel.

NOTE

Hold in the Rewind button to turn the recording mode Off and save the currently recorded transmission.

Using Rewind-Say-Again

1.During audio transmission, press REW button to listen to 20 seconds of the last recorded audio transmission. The REW icon will flash during the playing back of the message and a 20-second countdown begins.

2.Press the TALK, REW or MEM/ESC button during playback to stop the playback transmission. The radio returns to Standby mode.

Image 57

Cobra Electronics MR HH415LI VP EU owner manual Rewind-Say-Again Feature, Example, Using Rewind-Say-Again

Contents

MR HH415LI VP EU Our Thanks to You and Customer Assistance LCD Radio Controls and Indicators Backlit LCD Screen and Product Features Speaker/Mic Jack Product Features Table of Contents Important Safety Information Important Safety Information General Precautions Important Safety Information Recommendations for Marine Communication Recommendations for Marine Communication Station License Licensing InformationCanadian or U.S.A. Station License Radio Call Sign VHF Marine Radio Procedures Voice Calling Voice CallingVessel Corsair calling the vessel Vagabond Radiotelephone Calls Radiotelephone Calls Emergency Messages and Distress Procedure Emergency Messages and Distress Procedure If You Hear a Distress Call Marine Emergency Signals Tell where you are Marine Distress ProcedureSay End message by saying For Example VHF Marine Channel Assignments Port Operations Public Correspondence marine operatorNavigational Digital Selective Calling USA 03A Government Only International Distress, Safety and Calling 156.900 21A U.S. Government Only Canada Coastguard Only 23A Government Only61A U.S. Government Only Canada Coastguard Only Channel Digital Selective Calling Voice communications not allowed 64A U.S. Government Only Canada Commercial Fishing Limits 81A U.S. Government Only Environmental Protection Operations Included in this Package Included in this Package Antenna, Wrist Strap and Belt Clip Antenna InstallationWrist Strap Belt Clip Installing the Battery Pack Batteries and ChargerBatteries and Charger Initial Charge Alkaline Batteries To Remove Battery Pack from Radio Maintaining the Battery Charge Volume Control Power/Volume/Squelch Controls Power On/Off ControlGetting Started Common Radio Functions Talk Button Squelch Control Backlight/Key Lock Button TRI-WATCH Button Call/Enter/Setup Button Preset ButtonTo Display the Backlight Momentarily Key Lock Scan Button High/Medium/Low H-M-L Power Button To Toggle Between H-M-L Power ModesCall /Enter/Setup Button To Set Personal Default Settings Setup Mode Programming Setup Mode ProgrammingInternational/Canada/USA Channel Maps To Set Channel Map Operating Area To set VibrAlert VibrAlert Mode To Set Call Tone Call Tone Mode Key Tone Mode Roger Beep ModeTo Set Roger Beep On or Off To Set Key Tone On or Off Atis ID Programming Atis ID ProgrammingTo Set the Atis ID Number Atis ID Programming Standby/Receive and Transmit Marine Standby and Receive Rx Mode Transmit Tx Mode Standby/Receive TransmitTo Transmit a Message To Switch to Channel Channel 16 ModeAdvanced Operation Advanced Operation Tri-Watch Setup To Program or Edit the Tri-Watch Channels Tri-Watch Mode Tri-Watchmemory channels Using Tri-Watch Tri-Watch Scan Mode To Program Memory Locations Memory Location Mode To Exit Memory Location Mode To Recall a Stored Memory LocationTo Erase Stored Memory Locations To Enter Channel Scan Channel Scan Mode Memory Location Scan Mode From Marine Standby mode, press the MEM/ESC button To Enter Memory Location Scan Rewind-Say-Again Feature Using Rewind-Say-AgainExample Using Rewind-Say-Again to Record Audio Transmission Troubleshooting MaintenancePress Backlight Key Lock button Specifications Specifications English Accessories AccessoriesLapel Speaker/Microphone Declaration of Conformity and CE Marking