Maintaining the Battery Charge | Cobra Electronics MR HH415LI VP EU

Installation

Fully Charged

Partially Charged

Fully Discharged

Batteries and Charger

Maintaining the Battery Charge

As you use your radio, the battery power icon will show the battery power remaining. When the icon begins to flash, it is time to recharge or change the batteries.

NOTICE

Use only the drop-in charger provided by Cobra. Do not use the charger with alkaline batteries; only the lithium-ion (LiON) battery pack is rechargeable. Spent alkaline batteries must be discarded and replaced.

It is a good idea to keep a set of fresh, high-quality AA alkaline batteries with your radio. Should the rechargeable battery pack become discharged and no electrical power source is available, you can insert the alkaline battery tray with fresh alkaline batteries and continue to use your radio.

NOTE

Some radios with LiON batteries have AA or AAA battery packs which only allow low power transmit. The AA battery tray for the MR HH415 and a fresh set of alkaline batteries will allow for full power emergency transmissions.

Nothing Comes Close to a Cobra® 29

Image 34

Cobra Electronics MR HH415LI VP EU owner manual Maintaining the Battery Charge

Contents

MR HH415LI VP EU Our Thanks to You and Customer Assistance Radio Controls and Indicators LCD Backlit LCD Screen and Product Features Product Features Speaker/Mic Jack Table of Contents Important Safety Information Important Safety Information General Precautions Important Safety Information Recommendations for Marine Communication Recommendations for Marine Communication Canadian or U.S.A. Station License Licensing InformationStation License Radio Call Sign VHF Marine Radio Procedures Voice Calling Voice CallingVessel Corsair calling the vessel Vagabond Radiotelephone Calls Radiotelephone Calls Emergency Messages and Distress Procedure Emergency Messages and Distress Procedure Marine Emergency Signals If You Hear a Distress Call Say Marine Distress ProcedureTell where you are End message by saying For Example VHF Marine Channel Assignments Navigational Public Correspondence marine operatorPort Operations Digital Selective Calling USA International Distress, Safety and Calling 03A Government Only 156.900 23A Government Only 21A U.S. Government Only Canada Coastguard Only61A U.S. Government Only Canada Coastguard Only Channel 64A U.S. Government Only Canada Commercial Fishing Digital Selective Calling Voice communications not allowed Limits 81A U.S. Government Only Environmental Protection Operations Included in this Package Included in this Package Wrist Strap Antenna InstallationAntenna, Wrist Strap and Belt Clip Belt Clip Batteries and Charger Installing the Battery PackBatteries and Charger Initial Charge To Remove Battery Pack from Radio Alkaline Batteries Maintaining the Battery Charge Getting Started Power/Volume/Squelch Controls Power On/Off ControlVolume Control Common Radio Functions Squelch Control Talk Button To Display the Backlight Momentarily TRI-WATCH Button Call/Enter/Setup Button Preset ButtonBacklight/Key Lock Button Key Lock Scan Button To Toggle Between H-M-L Power Modes High/Medium/Low H-M-L Power ButtonCall /Enter/Setup Button To Set Personal Default Settings International/Canada/USA Channel Maps Setup Mode ProgrammingSetup Mode Programming To Set Channel Map Operating Area VibrAlert Mode To set VibrAlert Call Tone Mode To Set Call Tone To Set Roger Beep On or Off Roger Beep ModeKey Tone Mode To Set Key Tone On or Off Atis ID Programming Atis ID ProgrammingTo Set the Atis ID Number Atis ID Programming Marine Standby and Receive Rx Mode Standby/Receive and Transmit Standby/Receive Transmit Transmit Tx ModeTo Transmit a Message Advanced Operation Channel 16 ModeTo Switch to Channel Advanced Operation Tri-Watch Mode Tri-Watch Setup To Program or Edit the Tri-Watch Channels Using Tri-Watch Tri-Watch Scan Mode Tri-Watchmemory channels Memory Location Mode To Program Memory Locations To Recall a Stored Memory Location To Exit Memory Location ModeTo Erase Stored Memory Locations Channel Scan Mode To Enter Channel Scan Memory Location Scan Mode To Enter Memory Location Scan From Marine Standby mode, press the MEM/ESC button Using Rewind-Say-Again Rewind-Say-Again FeatureExample Using Rewind-Say-Again to Record Audio Transmission Press Backlight MaintenanceTroubleshooting Key Lock button Specifications Specifications English Accessories AccessoriesLapel Speaker/Microphone Declaration of Conformity and CE Marking