Manuals / Cobra Electronics / Marine Equipment / Fish Finder

Cobra Electronics Mrf 80b owner manual Receiving Distress Calls, When a Distress Call is Received

Models: Mrf 80b

1 83

Download 83 pages 45.59 Kb

Page 68

8187-F80-Operation-8_MMB:F75-Operation-8 12/29/06 9:04 AM Page 65

Operating Your Radio

Digital Select Calling (DSC) ProductOperationFeatures

Distress Call MMSI

The Distress alarm sounds to confirm that the message is transmitted. At the end of the transmission, the radio maintains a watch on Channel 16 and Channel 70 for an acknowledgement. Press any button to turn Off the alarm and return to Standby mode.

■If an acknowledgement is received, the Distress alarm sounds again and the responding party’s MMSI number displays on the LCD.

■If no acknowledgement is received, the radio resends the message at approximately four (4) minute intervals until an acknowledgement is received or the Distress call is aborted.

Receiving Distress Calls

When a vessel is within range of a DSC Distress call, the radio receives the call, sounds the Distress alarm, and switches to Channel 16. All DSC calls that are received will sound one (1) alert alarm. See pages 36-37 for descriptions of the different alarms. Press any button to turn Off the alarm. The received call information continues to display on the LCD.

When a Distress Call is Received:

1.Press any button to turn Off the alarm and return to Standby mode on Channel 16.

2.Read and write down the distress information that displays on the LCD (position data may or may not be shown); then determine whether to answer the call.

3.Respond, if appropriate, by pressing and holding the Talk button to transmit on Channel 16.

4.The received information is placed into the Call Log. See page 75 for more information on viewing the Call Log.

5.If MMSI (Maritime Mobile Service Identify) matches a contact from the Individual Directory entry stored in your radio, the name identification displays and the alarm sounds to identify the Name of the matching MMSI member.

6.Press ESC after viewing the display to return to normal Standby mode.

NOTE

The radio automatically switches to Channel 16 upon

Nothing Comes Close to a Cobra® 65

Image 68

Cobra Electronics Mrf 80b owner manual Receiving Distress Calls, When a Distress Call is Received

Contents

For Assistance Outside the U.S.A Our Thanks to you Customer AssistanceCustomer Assistance For Assistance in the U.S.A Product Features Indicators and ConnectionsProduct Features Microphone/Speaker Backlit LCD Liquid Crystal Display ScreenBacklit LCD Liquid Crystal Display Screen Microphone/Speaker with Auxiliary ControlsTable Of Contents Safety Training Information Important Safety InformationImportant Safety Information Always use only Cobra authorized accessories Recommendations for Marine Communication Recommendations for Marine CommunicationFCC Licensing Information VHF Marine Radio Procedures Voice Calling Vessel Corsair calling the vessel Vagabond Digital Selective Calling DSCDigital Selective Calling DSC Maritime Mobile Service Identity Mmsi Mmsi Numbers are available in the U.S.A. from these SourcesMaritel 888-Maritel Canada, ContactRadiotelephone Calls Radiotelephone CallsThree 3 spoken international emergency signals are Emergency Messages and Distress ProcedureMarine Emergency Signals Marine Distress Procedure Tell where you areIf You Hear a Distress Call SayMarine Distress Procedure DSC VHF Marine Channel Assignments Public Correspondence Marine Operator Port OperationsNavigational Maritime Control156.050 01A 156.050156.100 156.15003A Government Only Unauthorized State Controlled U.S.A. Only18A 19A20A 21A21A U.S. Government Only Canada Coast Guard Only 23A Government Only156.175 63A 156.175156.225 64A 156.22564A U.S. Government Only Canada Commercial Fishing Non-Commercial RecreationalDigital Selective Calling Voice communications not allowed Non-Commercial Intership Only156.925 78A 156.925156.975 79A 156.97581A U.S. Government Only Environmental Protection Operations Noaa Weather Channels and Alert Noaa Weather Channels and AlertNoaa Emergency Weather Alert TestE172.50 to W172.50 World City Time ZonesWorld City Time Zones Included in this Package Included in this PackageSurface Mount Mounting and Powering the RadioInstalling Your Radio Mounting Powering the Radio To Install The Microphone Bracket Mounting KitMicrophone Bracket Mounting Kit Flush MountElectrical Power Connection To Connect to a Power SourceLength Wire Gauge Safe Maximum Permissible Exposure MPE Radius Installation RequirementsAntenna Requirements and Attachment Antenna Lead Attachment To Install an External Speaker External Devices and ConnectionsNmea Communication Cable External Speaker Not IncludedTo Install a Public Address Speaker To Install a GPS DeviceExternal Devices Connections Public Address Speaker Not IncludedSatellite acquisition time is dependent on the GPS device CobraMarine Chartplotter MC 600C SeriesTo Install the Chartplotter Getting Started Tones and AlarmsGetting Started Power On-Off Volume/Squelch Squelch Channel Select Using Radio KnobChannel Select Using Microphone Local Mode Button Channel Preset Function ButtonsStandby and Receive From Standby Mode, You CanSetup Mode Programming Setup Mode Programming Setup MenuBasic Scrolling in the Setup Menus To Enter the Setup MenuLCD Display Lamp Adjust To Adjust the LCD Display Lamp LevelEnter the Setup menu and scroll to the Lamp ADJ menu LCD ContrastKey Tone To Turn the Confirmation Key Tone On or OffTime Offset To Change the Time OffsetA./International/Canada UIC Channel Maps To Set the Radio for the Area UsedSpecial Features Special Features Rewind-Say-Again FeatureExample Operation of Rewind-Say-AgainMake Your Own Recording VoiceProductTransmissionFeatures Voice TransmissionChannels Choose One of the Following Options to Change the ChannelTransmit Power Output To Toggle Between the High and Low Power ModesVoice Transmission Transmit a MessagePublic Address To Broadcast on the PA SpeakerWeather Alert Setup Noaa All Hazards/Weather Radio and Alert, w/SAMENoaa All Hazards/Weather Radio and Alert, w/SAME To Listen to the Weather ChannelsSpecific Area Message Encoding Same To Set the Same Weather AlertSame Event Code Alert AdvancedProduct FeaturesOperation To Switch to Channel 16 or ChannelAdvanced Operation Channel 16/9Set Tri-Watch Channels During Tri-Watch When Receiving an Incoming TransmissionTri-Watch Advanced Operation Memory ChannelsTo Program Memory Channels To Clear Memory ChannelsFrom Standby mode, press the Memory Scan button Scanning of Memory ChannelsTo Enter Memory Scan Operation from the Microphone Digital Select Calling DSC ProductSetup Features Digital Select Calling DSC SetupUser Mmsi Number To Enter an Mmsi NumberTransferring a Radio to a Different Vessel To View the Programmed Mmsi Number at Any TimeDSC Scanning Group Mmsi NumberTo Turn DSC Scanning On or Off At the beginningEnter the Setup menu and scroll to GRP Mmsi menu Position Request Reply TypeTo Enter a Group Mmsi Number Will be entered automaticallyIndividual Directory Digital Select Calling DSC ProductOperationFeatures Digital Select Calling DSC OperationSending Distress Calls To Send a DSC Distress Call8187-F80-Operation-8MMBF75-Operation-8 12/29/06 904 AM Abort the Distress Call ProcessWhen a Distress Call is Received Receiving Distress CallsRegarding Distress Relay Calls Receiving Distress Relay CallsSending an All Ships Call To Send an All Ships CallWhen an All Ships Call is Heard Receiving an All Ships CallWhen a Geographical Call Sounds Press any button to turn Off the alarmSending a Geographical Call Receiving a Geographical CallSending an Individual Call To Send an Individual CallReceiving an Individual Call Sending a Group CallTo Receive an Individual Call Press the Talk button and greet the callerReceiving a Group Call Sending a Position RequestTo Receive a Group Call To Request the Position of Another StationReceiving a PositionIf You Receive a Position When the Radio is in the Manual Reply Mode Receiving a Position RequestIf You Choose to Reply with Your Position If You Choose Not to ReplyTo Exit From the Position Send Mode Sending a Position SendReceiving a Position Send To Send a Position Send MessageTo Clear Messages From The Log Memory To Review Log Messages Received While in DSC Standby ModeCall Log and Distress Log Maintenance TroubleshootingNo display on LCD when Improper power Readjust volumeSpecifications SpecificationsWarrantyProduct Featuresand Trademark Exclusions This limited warranty does not applyFor Products Purchased in the U.S.A For Products Purchased Outside the U.S.AProduct ServiceFeatures Send the entire productFlush Mount Template / Plantilla para montaje empotrado Precaución