F80
Introduction
Important Safety Information
The following WARNINGS and NOTICE information will make you aware of RF exposure hazards and how to assure you operate the radio within the FCC RF exposure limits established for the radio.
WARNINGS
Your radio generates electromagnetic RF (radio frequency) energy when
it is transmitting. To ensure that you and those around you are not exposed to excessive amounts of that energy, DO NOT touch the antenna when transmitting and KEEP yourself and all others on your vessel the required distance away from the antenna while transmitting. See page 31 in the antenna requirements section for further information.
DO NOT operate the radio without a proper antenna or equivalent dummy load attached. Doing so may expose you to excessive RF energy and will damage the radio.
DO NOT transmit more than 50% of the time the radio is in use — 50% duty cycle. The radio is transmitting when the Talk button is pressed and the transmit information shows on the LCD screen.
ALWAYS use only Cobra authorized accessories.
DO NOT operate the radio in an explosive atmosphere, near blasting sites, or in any area where signs are posted prohibiting radio transmissions.
NEVER connect the transceiver to AC power. It can be a fire hazard, may cause an electric shock and may damage the transceiver.
NEVER mount the transceiver or microphone/speaker where they might interfere with operation of your vessel or cause injury.
DO NOT allow children or anyone unfamiliar with proper procedures to operate the radio without supervision.
Failure to observe any of these warnings may cause you to exceed FCC RF exposure limits or create other dangerous conditions.
NOTE
Throughout this manual, the term “Transceiver” will be used to identify the main unit containing the LCD screen and controls. The term “Radio” will be used to identify the entire equipment including transceiver, microphone, antenna and any attached external speakers.
Nothing Comes Close to a Cobra® 3
