Voice Transmission, Transmit a Message | Cobra Electronics Mrf 80b

8187-F80-Operation-8_MMB:F75-Operation-8 12/29/06 9:03 AM Page 48

Operating Your Radio

Voice Transmission

Transmit Power Output

HI/LO Power Button

Standby Low Power Mode

Standby High Power Mode

The radio transmits selectively at 1 or 25 watts of power. Cobra suggests maintaining the low power setting for short- range communications to avoid overpowering nearby stations with the signal. Use the high power setting for long-range communications or when no response is received from a signal sent at 1 watt.

To Toggle Between the High and Low Power Modes:

Press the HI/LO Power button.

The LCD displays which mode is selected.

Some channels are restricted to be used at a maximum of 1 watt. The radio automatically sets the power to Low Power mode when a restricted channel is selected.

While using the U.S.A. channel map, if, in an emergency, it is necessary to increase the output power on Channel 13 and Channel 67 for the signal to be heard, override the Low Power mode by pressing and holding the HI/LO Power button.

Transmit Low Power Mode

Transmit High Power Mode

Transmit a Message

To Transmit a Message:

1.Check to see that the radio is set to a proper channel for the type of message being sent.

2.Toggle to the low power setting by pressing the HI/LO Power button.

3.With the microphone about 2 in. (51 mm) from your mouth, press and hold the Talk button and speak into the microphone. TX (Transmit) displays on the LCD display.

4.Release the Talk button when finished speaking. To hear a response, the Talk button must be released.

48 English

Image 51

Cobra Electronics Mrf 80b owner manual Voice Transmission, Transmit Power Output, To Transmit a Message

Contents

Our Thanks to you Customer Assistance Customer Assistance For Assistance in the U.S.AFor Assistance Outside the U.S.A Indicators and Connections Product FeaturesProduct Features Microphone/Speaker with Auxiliary Controls Microphone/SpeakerBacklit LCD Liquid Crystal Display Screen Backlit LCD Liquid Crystal Display Screen Table Of Contents Important Safety Information Important Safety InformationSafety Training Information Always use only Cobra authorized accessories Recommendations for Marine Communication Recommendations for Marine Communication FCC Licensing Information VHF Marine Radio Procedures Voice Calling Digital Selective Calling DSC Digital Selective Calling DSCVessel Corsair calling the vessel Vagabond Canada, Contact Maritime Mobile Service Identity MmsiMmsi Numbers are available in the U.S.A. from these Sources Maritel 888-Maritel Radiotelephone Calls Radiotelephone Calls Emergency Messages and Distress Procedure Marine Emergency SignalsThree 3 spoken international emergency signals are Say Marine Distress ProcedureTell where you are If You Hear a Distress Call Marine Distress Procedure DSC VHF Marine Channel Assignments Maritime Control Public Correspondence Marine OperatorPort Operations Navigational 156.150 156.05001A 156.050 156.100 State Controlled U.S.A. Only 03A Government Only Unauthorized 21A 18A19A 20A 23A Government Only 21A U.S. Government Only Canada Coast Guard Only 64A 156.225 156.17563A 156.175 156.225 Non-Commercial Intership Only 64A U.S. Government Only Canada Commercial FishingNon-Commercial Recreational Digital Selective Calling Voice communications not allowed 79A 156.975 156.92578A 156.925 156.975 81A U.S. Government Only Environmental Protection Operations Test Noaa Weather Channels and AlertNoaa Weather Channels and Alert Noaa Emergency Weather Alert World City Time Zones World City Time ZonesE172.50 to W172.50 Included in this Package Included in this Package Mounting and Powering the Radio Installing Your RadioSurface Mount Flush Mount Mounting Powering the RadioTo Install The Microphone Bracket Mounting Kit Microphone Bracket Mounting Kit To Connect to a Power Source Electrical Power Connection Length Wire Gauge Installation Requirements Antenna Requirements and AttachmentSafe Maximum Permissible Exposure MPE Radius Antenna Lead Attachment External Speaker Not Included To Install an External SpeakerExternal Devices and Connections Nmea Communication Cable Public Address Speaker Not Included To Install a Public Address SpeakerTo Install a GPS Device External Devices Connections CobraMarine Chartplotter MC 600C Series To Install the ChartplotterSatellite acquisition time is dependent on the GPS device Tones and Alarms Getting StartedGetting Started Power On-Off Volume/Squelch Channel Select Using Radio Knob Channel Select Using MicrophoneSquelch Channel Preset Function Buttons Local Mode Button From Standby Mode, You Can Standby and Receive To Enter the Setup Menu Setup Mode ProgrammingSetup Mode Programming Setup Menu Basic Scrolling in the Setup Menus LCD Contrast LCD Display Lamp AdjustTo Adjust the LCD Display Lamp Level Enter the Setup menu and scroll to the Lamp ADJ menu To Change the Time Offset Key ToneTo Turn the Confirmation Key Tone On or Off Time Offset To Set the Radio for the Area Used A./International/Canada UIC Channel Maps Operation of Rewind-Say-Again Special FeaturesSpecial Features Rewind-Say-Again Feature Example Make Your Own Recording Choose One of the Following Options to Change the Channel VoiceProductTransmissionFeaturesVoice Transmission Channels Transmit a Message Transmit Power OutputTo Toggle Between the High and Low Power Modes Voice Transmission To Broadcast on the PA Speaker Public Address To Listen to the Weather Channels Weather Alert SetupNoaa All Hazards/Weather Radio and Alert, w/SAME Noaa All Hazards/Weather Radio and Alert, w/SAME To Set the Same Weather Alert Specific Area Message Encoding Same Same Event Code Alert Channel 16/9 AdvancedProduct FeaturesOperationTo Switch to Channel 16 or Channel Advanced Operation During Tri-Watch When Receiving an Incoming Transmission Tri-WatchSet Tri-Watch Channels To Clear Memory Channels Advanced OperationMemory Channels To Program Memory Channels Scanning of Memory Channels To Enter Memory ScanFrom Standby mode, press the Memory Scan button Operation from the Microphone To Enter an Mmsi Number Digital Select Calling DSC ProductSetup FeaturesDigital Select Calling DSC Setup User Mmsi Number To View the Programmed Mmsi Number at Any Time Transferring a Radio to a Different Vessel At the beginning DSC ScanningGroup Mmsi Number To Turn DSC Scanning On or Off Will be entered automatically Enter the Setup menu and scroll to GRP Mmsi menuPosition Request Reply Type To Enter a Group Mmsi Number Individual Directory To Send a DSC Distress Call Digital Select Calling DSC ProductOperationFeaturesDigital Select Calling DSC Operation Sending Distress Calls Abort the Distress Call Process 8187-F80-Operation-8MMBF75-Operation-8 12/29/06 904 AM Receiving Distress Calls When a Distress Call is Received To Send an All Ships Call Regarding Distress Relay CallsReceiving Distress Relay Calls Sending an All Ships Call Receiving an All Ships Call When an All Ships Call is Heard Receiving a Geographical Call When a Geographical Call SoundsPress any button to turn Off the alarm Sending a Geographical Call To Send an Individual Call Sending an Individual Call Press the Talk button and greet the caller Receiving an Individual CallSending a Group Call To Receive an Individual Call To Request the Position of Another Station Receiving a Group CallSending a Position Request To Receive a Group Call Receiving a PositionIf You Receive a Position If You Choose Not to Reply When the Radio is in the Manual Reply ModeReceiving a Position Request If You Choose to Reply with Your Position To Send a Position Send Message To Exit From the Position Send ModeSending a Position Send Receiving a Position Send To Review Log Messages Received While in DSC Standby Mode Call Log and Distress LogTo Clear Messages From The Log Memory Readjust volume MaintenanceTroubleshooting No display on LCD when Improper power Specifications Specifications For Products Purchased Outside the U.S.A WarrantyProduct Featuresand TrademarkExclusions This limited warranty does not apply For Products Purchased in the U.S.A Send the entire product Product ServiceFeatures Precaución Flush Mount Template / Plantilla para montaje empotrado