Key Tone, Time Offset | Cobra Electronics Mrf 80b instruction

8187-F80-Operation-8_MMB:F75-Operation-8 12/29/06 9:02 AM Page 43

Operating Your Radio

Setup Mode Programming

Key Tone

On/Off

Time Offset

Set Time

Key Tone

The confirmation key tone sounds when the CobraMarine VHF radio is turned On and confirms all button presses except for the Talk button. The confirmation key tone is easily turned On or Off. Make all confirmation key tone adjustments in the KEY TONE menu.

To Turn the Confirmation Key Tone On or Off:

1.Enter the Setup menu and scroll to the KEY TONE menu.

2.Press the Enter button and observe the current confirmation key tone setting — High, Medium, Low or Off.

3.Select your desired level.

4.Press the Enter button to select the key tone setting.

5.When the changes are complete, exit the KEY TONE menu and return to the Setup menu.

Time Offset

All VHF, DSC, and GPS activities use a 24-hour clock and Coordinated Universal Time (UTC) formerly known as Greenwich Mean Time (GMT). Time Offset uses a connected GPS to gather time inputs. To convert time inputs to local time, enter the hour offset of the local time zone from the Time Zone Chart on page 25.

To Change the Time Offset:

1.Enter the Setup menu and scroll to TIMEOFST menu.

2.Press the Enter button and observe the current time offset setting.

3.Move the selection arrow to the setting for your local time zone.

4.Press the Enter button to select the local time zone setting.

5.When the changes are complete, exit the TIMEOFST menu and return to the Setup menu.

Nothing Comes Close to a Cobra® 43

Image 46

Cobra Electronics Mrf 80b owner manual To Turn the Confirmation Key Tone On or Off, To Change the Time Offset

Contents

Customer Assistance For Assistance in the U.S.A Our Thanks to you Customer AssistanceFor Assistance Outside the U.S.A Product Features Indicators and ConnectionsProduct Features Backlit LCD Liquid Crystal Display Screen Microphone/SpeakerBacklit LCD Liquid Crystal Display Screen Microphone/Speaker with Auxiliary Controls Table Of Contents Important Safety Information Important Safety InformationSafety Training Information Always use only Cobra authorized accessories Recommendations for Marine Communication Recommendations for Marine Communication FCC Licensing Information VHF Marine Radio Procedures Voice Calling Digital Selective Calling DSC Digital Selective Calling DSCVessel Corsair calling the vessel Vagabond Maritel 888-Maritel Maritime Mobile Service Identity MmsiMmsi Numbers are available in the U.S.A. from these Sources Canada, Contact Radiotelephone Calls Radiotelephone Calls Marine Emergency Signals Emergency Messages and Distress ProcedureThree 3 spoken international emergency signals are If You Hear a Distress Call Marine Distress ProcedureTell where you are Say Marine Distress Procedure DSC VHF Marine Channel Assignments Navigational Public Correspondence Marine OperatorPort Operations Maritime Control 156.100 156.05001A 156.050 156.150 03A Government Only Unauthorized State Controlled U.S.A. Only 20A 18A19A 21A 21A U.S. Government Only Canada Coast Guard Only 23A Government Only 156.225 156.17563A 156.175 64A 156.225 Digital Selective Calling Voice communications not allowed 64A U.S. Government Only Canada Commercial FishingNon-Commercial Recreational Non-Commercial Intership Only 156.975 156.92578A 156.925 79A 156.975 81A U.S. Government Only Environmental Protection Operations Noaa Emergency Weather Alert Noaa Weather Channels and AlertNoaa Weather Channels and Alert Test World City Time Zones World City Time ZonesE172.50 to W172.50 Included in this Package Included in this Package Installing Your Radio Mounting and Powering the RadioSurface Mount Microphone Bracket Mounting Kit Mounting Powering the RadioTo Install The Microphone Bracket Mounting Kit Flush Mount Electrical Power Connection To Connect to a Power Source Length Wire Gauge Antenna Requirements and Attachment Installation RequirementsSafe Maximum Permissible Exposure MPE Radius Antenna Lead Attachment Nmea Communication Cable To Install an External SpeakerExternal Devices and Connections External Speaker Not Included External Devices Connections To Install a Public Address SpeakerTo Install a GPS Device Public Address Speaker Not Included To Install the Chartplotter CobraMarine Chartplotter MC 600C SeriesSatellite acquisition time is dependent on the GPS device Getting Started Tones and AlarmsGetting Started Power On-Off Volume/Squelch Channel Select Using Microphone Channel Select Using Radio KnobSquelch Local Mode Button Channel Preset Function Buttons Standby and Receive From Standby Mode, You Can Basic Scrolling in the Setup Menus Setup Mode ProgrammingSetup Mode Programming Setup Menu To Enter the Setup Menu Enter the Setup menu and scroll to the Lamp ADJ menu LCD Display Lamp AdjustTo Adjust the LCD Display Lamp Level LCD Contrast Time Offset Key ToneTo Turn the Confirmation Key Tone On or Off To Change the Time Offset A./International/Canada UIC Channel Maps To Set the Radio for the Area Used Example Special FeaturesSpecial Features Rewind-Say-Again Feature Operation of Rewind-Say-Again Make Your Own Recording Channels VoiceProductTransmissionFeaturesVoice Transmission Choose One of the Following Options to Change the Channel Voice Transmission Transmit Power OutputTo Toggle Between the High and Low Power Modes Transmit a Message Public Address To Broadcast on the PA Speaker Noaa All Hazards/Weather Radio and Alert, w/SAME Weather Alert SetupNoaa All Hazards/Weather Radio and Alert, w/SAME To Listen to the Weather Channels Specific Area Message Encoding Same To Set the Same Weather Alert Same Event Code Alert Advanced Operation AdvancedProduct FeaturesOperationTo Switch to Channel 16 or Channel Channel 16/9 Tri-Watch During Tri-Watch When Receiving an Incoming TransmissionSet Tri-Watch Channels To Program Memory Channels Advanced OperationMemory Channels To Clear Memory Channels To Enter Memory Scan Scanning of Memory ChannelsFrom Standby mode, press the Memory Scan button Operation from the Microphone User Mmsi Number Digital Select Calling DSC ProductSetup FeaturesDigital Select Calling DSC Setup To Enter an Mmsi Number Transferring a Radio to a Different Vessel To View the Programmed Mmsi Number at Any Time To Turn DSC Scanning On or Off DSC ScanningGroup Mmsi Number At the beginning To Enter a Group Mmsi Number Enter the Setup menu and scroll to GRP Mmsi menuPosition Request Reply Type Will be entered automatically Individual Directory Sending Distress Calls Digital Select Calling DSC ProductOperationFeaturesDigital Select Calling DSC Operation To Send a DSC Distress Call 8187-F80-Operation-8MMBF75-Operation-8 12/29/06 904 AM Abort the Distress Call Process When a Distress Call is Received Receiving Distress Calls Sending an All Ships Call Regarding Distress Relay CallsReceiving Distress Relay Calls To Send an All Ships Call When an All Ships Call is Heard Receiving an All Ships Call Sending a Geographical Call When a Geographical Call SoundsPress any button to turn Off the alarm Receiving a Geographical Call Sending an Individual Call To Send an Individual Call To Receive an Individual Call Receiving an Individual CallSending a Group Call Press the Talk button and greet the caller To Receive a Group Call Receiving a Group CallSending a Position Request To Request the Position of Another Station Receiving a PositionIf You Receive a Position If You Choose to Reply with Your Position When the Radio is in the Manual Reply ModeReceiving a Position Request If You Choose Not to Reply Receiving a Position Send To Exit From the Position Send ModeSending a Position Send To Send a Position Send Message Call Log and Distress Log To Review Log Messages Received While in DSC Standby ModeTo Clear Messages From The Log Memory No display on LCD when Improper power MaintenanceTroubleshooting Readjust volume Specifications Specifications For Products Purchased in the U.S.A WarrantyProduct Featuresand TrademarkExclusions This limited warranty does not apply For Products Purchased Outside the U.S.A Product ServiceFeatures Send the entire product Flush Mount Template / Plantilla para montaje empotrado Precaución