Cobra Electronics Mrf 80b Setup Mode Programming Setup Menu, To Enter the Setup Menu

Models: Mrf 80b

1 83
Download 83 pages 45.59 Kb
Page 44
Image 44

F80 Installation.qxp:QXP-1058720374.qxp 12/29/06 10:03 AM Page 41

Introduction

Setup Mode Programming

Setup Mode Programming

Setup Menu

Call/Setup Button

Setup Menu

Use the Setup menu in the CobraMarine VHF radio to turn On and Off many features, to adjust feature preferences and enter a user MMSI number.

NOTE

Basic Setup menu programming is described in this section. For Setup menu programming that applies to a specific function refer to that section in this manual. For example, MMSI information is in the DSC portion of the manual.

Channel Knob

SELECT

MEM

Mic Channel Buttons

Mic Function Buttons

Basic Scrolling in the Setup Menus:

The Channel Select knob on the radio can be used to scroll through different menus and confirm selections chosen by the user. Alternately, scrolling selection functions can be made from the microphone by using the Channel Up/Down or Function (F1/F2) button.

To Enter the Setup Menu:

Press and hold the Call/Setup button. The Setup menu appears on the LCD. Scroll up or down through the Setup menu until the desired function to program is positioned to the right of the selection arrow.

To Exit any Setup Menu:

Scroll down to “EXIT” at the bottom of the menu. With the arrow pointing toward “EXIT,” press the Enter button to return the radio to the Standby mode.

Exit

Enter Button

NOTE

The ESC button on the radio (and the Function F1/F2 button on the microphone) can also be used universally to return to the Standby mode.

Nothing comes close to a Cobra® 41

Page 44
Image 44
Cobra Electronics Mrf 80b owner manual Setup Mode Programming Setup Menu, Basic Scrolling in the Setup Menus