COBY electronic TF-TV3709, TF-TV4209 manual Connecting a VCR, Connecting a DVD Player

Connecting a VCR

External devices may have different terminals for the same functions.

VCR

Rear of the TV

Sound Cable

Video Cable

or

S-Video Connector

Useful Tips

☛If there is a terminal called [S-Video Output], connect the TV [S-Video Input] terminal to the VCR [S-video output] terminal. Connect the sound cable to the [Video2 / S-Video Input left / right] (white / red).

VIDEO1

Useful Tips

☛When connecting a TV and VCR with an S-Video cable, press the [INPUT] button to select <S-VIDEO>.

Connecting the video / sound cables

1Connect the antenna cable to the Antenna input of the rear panel of the VCR.

2Use the video cable to connect the [AV1 video input] or [AV2 video input] (yellow) terminal at the back of the TV to the [video Output] (Yellow) of the VCR.

3Use the sound cable to connect the [AV1 sound input left / right] or [AV2 sound input left / right] (white/red) terminal at the back of the TV to the [sound output] (white/red) of the VCR.

Watching a VCR

1Turn on the TV and press the [INPUT] button, then select <AV1> or <AV2>. If <external input> mode is not selected, check your video connection.

2Turn on the VCR and press the play button.

Connecting a DVD Player

External devices may have different connecting terminals.

DVD

Rear of the TV

Audio Cable

Component Cable

Useful Tips

☛Component output terminals may be labeled either "YUV" or "Y, Pb/Cb, Pr/Cr".

☛If the DTV receiver supports DVI, it may be connected via an HDMI or DVI cable instead of a component cable.

HDMI

Useful Tips

☛When connecting the [TV] and the [DVD] with the HDMI cable, press the [INPUT] button and select <HDMI>.

14

Connecting to a DVD player

1Use the component video cable to connect the [COMPONENT 1 video input] or [COMPONENT 2 video input Y, Pb, Pr] (Green/Blue/Red) terminal at the back of the TV to the [Component output] on the DVD player.

2Use the sound cable to connect the [COMPONENT1 sound input left/right] or the [COMPONENT2 sound input left/right] (white/red) input terminal to the [sound output] (white/red) output terminal of the DVD player.

Viewing a DVD

1Turn on the TV, press the [INPUT] button, then select <COMPONENT 1>

or <COMPONENT 2>. (If <component> mode is not selected, check if the component connectors are connected.)

2Turn on the DVD player and press the play button on the DVD player.