Compaq manual No. Description, mar345 Program Manual

mar345 Program Manual 3 8

______________________________________________________________________________________

Tabel continued from previous page.

_______________________________________________________________________

No. Description

_______________________________________________________________________

1101	Message:	"No scan modes found in nb_code ..."
1102		"Something wrong with byteorder in nb_code ..."
1105	Reason:	"No suitable scanning mode found in nb_code".
		File $MARTABLEDIR/mar2300.XXX and/or
	Action:	$MARTABLEDIR/mar3450.XXX may be corrupted or empty.
		Check file sizes (73 MB and 103MB). Use command:
		catmar $MARTABLEDIR/mar2300.XXX
		to look at the calibration file header.
1103	Message:	"Scanner serial number in nb_code differs from config"
	Reason:	The scanner no. in the file headers of files
		$MARTABLEDIR/mar2300.XXX and/or
		$MARTABLEDIR/mar3450.XXX are not identical to
		$MAR_SCANNER_NO. The calibration files may not
	Action:	belong to the scanner.
		Call.
1110	Message:	"Cannot create image file"
1111		"Cannot open image file"
1112		"Error writing image array"
1115	Reason:	"Error writing image header"
		Insufficient disk space or invalid file permissions.
	Action:	Clean up disk or check data directory permissions.
1215/1241	Message:	"Cannot OPEN SHUTTER at START of EXPOSURE"
1234		"SHUTTER was already OPEN at START of EXPOSURE!"
1238	Reason:	"Cannot CLOSE SHUTTER at END of EXPOSURE!"
		X−ray beam shutter damaged or dirty. Otherwise, the manual
		shutter operation switch mounted on the base may have
	Action:	been left in the "Open" state.
		Check shutter and manual shutter switch on the base.
		Open and close the shutter manually. Is it very hard
		to operate?
1239	Message:	"STEPPER error during EXPOSURE!"
	Reason:	Problem with PHI axis movement. Possibly software related.
	Action:	Mail mar.spy file. Call.

_______________________________________________________________________