Running mar345, Command Line

mar345 Program Manual

______________________________________________________________________________________

2. Running mar345

The program mar345 should be started by just typing "mar345". The program, however, understands the following command line options:

mar345	[−h] [−colors N] [−def XXXX] [−host HOST] [−keep]
	[−more N] [−noxf] [−port PORT] [−setd]
The command line options are:
− h	Print a usage summary
− colors N	Use N colors for drawing images.
	Default: take N from configuration file.
− def XXXX	When starting the program, go to scanmode XXXX where
	XXXX is 1200, 1600, 1800, 2000, 2300, 2400, 3000 or 3450.
	Default: stay in current scan mode.
− host HOST	Connect to host HOST.
	Default: take HOST from configuration file (usually 192.0.2.1)
− keep	Spiral images will be saved on disk.
	Default: do not produce spiral files, only transformed images.
− more N	Log output level with N=0, 1, 2 or 3.
	Use more > 0 only in case of hardware problems.
	Default: N=0 (compact output)
− noxf	Spiral images will not be transformed into Cartesian images.
	The program then requires much less memory, but images
	cannot be displayed.
	Default: Do transform spiral images.
− port PORT	Connect to host HOST via socket port PORT.
	Default: take PORT from configuration file (usually 4441)
− setd	The user may redefine the distance detector to crystal from
	within the program.
	Default: Redefining the distance is disallowed..