mar345 Program Manual | 4 |
______________________________________________________________________________________
1. Introduction
The program mar345 is a fully menu driven graphical user interface (GUI) for collecting and displaying images on a mar345 imaging plate system.
The program is provided as binary executable for several computer platforms and operating systems:
− | Silicon Graphics: | IRIX 5.x, 6.x |
− | Digital: | Compaq Tru Unix 4.x, 5.x |
− | Linux: | RedHat 5.x, 6.x, SuSE 6.x |
1.1 Computer Requirements
−Motif 1.2.x shared libraries (except Linux).
−8/16/24/32−bit colors X−windows terminal with 1280x1024 pixels.
−Standard Helvetica and Symbol fonts.
−96 MB RAM memory or more.
1.2 Environment
The program relies on definitions of the following environment variables:
− | MARTABLEDIR | Location of the scanner specific calibration files mar2300.XXX |
|
| and mar3450.XXX and the corresponding configuration file |
− MAR_SCANNER_NO | config.XXX (where XXX = MAR_SCANNER_NO ). | |
Three digit serial number, e.g. 049. | ||
− | MARLOGDIR | Location of the log output files. |
− | MARHELPDIR | Location of interactive help files. |
The program relies on the correct network setup, i.e. the mar345 scanner must be accessible by ping and telnet with IP−address 192.0.2.1.
For a description of the setup of the mar345 software suite, see the "mar345 Installation Guide".
