5–18 Maintenance and Service Guide
Removal and Replacement Procedures

5.8 Connector Cover

The connector cover is available with carbon finish for Evo
Notebook N1000 models and silver finish for Presario 1500
models, and are included in the Miscellaneous Plastics/Hardware
Kit, spare part number 285541-001.
1. Prepare the computer for disassembly (Section 5.3).
2. Turn the computer bottom side up with the rear panel facing
forward.
3. Remove the two TM2.5 × 5.0 screws 1 that secure the
connector cover to the base enclosure (Figure 5-15).
4. Open the connector cover 2.
5. Remove the connector cover from the base enclosure 3.
Figure 5-15. Removing the Connector Cover
Reverse the preceding procedures to install the connector cover.
279372-001.book Page 18 Friday, July 19, 2002 11:50 AM