Compaq N1000 manual Reverse the preceding procedures to install the modem cable

Removal and Replacement Procedures

2.Turn the system board bottom side up with the rear panel facing forward.

3.Remove the PM2.0 × 4.5 screw 1 that secures the modem ground cable to the system board (Figure 5-46).

4.Disconnect the modem cable 2 from the system board.

5.Remove the cable from the clips 3 on the system board.

Figure 5-46. Removing the Modem Cable

Reverse the preceding procedures to install the modem cable.

5–60 Maintenance and Service Guide