Compaq N1000 manual Removing the TouchPad Components on Dual Stick Models

Removal and Replacement Procedures

12.Remove the five TM2.5 × 5.0 screws 1 that secure the TouchPad, TouchButton board, TouchPad bracket, and pointing stick board to the palm rest (Figure 5-35).

13.Remove the TouchPad bracket 2, pointing stick board 3, TouchPad 4, and TouchButton board 5 from the palm rest.

.

Figure 5-35. Removing the TouchPad Components on Dual Stick Models

Reverse the preceding procedures to install the TouchPad components.

5–44 Maintenance and Service Guide