Compaq N1000 manual Reverse the preceding procedures to install the top cover

Removal and Replacement Procedures

✎After the top cover is removed, the system board-to-TouchButton board cable can be removed. The system board-to-TouchButton board cable is included in the Miscellaneous Cable Kit, spare part number 285540-001.

10.Release the ZIF connector 1 to which the system board-to-TouchButton board cable is attached and disconnect the cable 2 from the system board (Figure 5-41).

Figure 5-41. Removing the System Board-to-TouchButton Board Cable

Reverse the preceding procedures to install the top cover.

5–52 Maintenance and Service Guide