Connect Tech CTIM-00043 user manual Introduction, Features

CANpro/104 User Manual

Introduction

CANpro/104 combines the power of two independent NXP SJA1000 CAN controllers with the compact size and rugged stability of PC/104. CANpro/104 is ideal for industrial control applications exposed to harsh conditions or environments. CANpro/104 Opto models feature 2.5 kV of data and power isolation.

Features

●Two independent, industry standard NXP SJA1000 CAN controllers

●PC/104 compliant

●16MHz input clock (24MHz build option available)

●Fail-safe power-up/power-down using on-board impendence transceivers to maximize nodes on the bus and ensure glitch-free operation.

●Supports up to 1.0 Mbps operation and over 120 nodes on the bus

●2000 V(AC) 50/60 Hz sine wave, 2500 V (peak) signal and power isolation for each port from the host system (on CANpro/104 Opto models only)

●Jumper configurable:

●address range and interrupt sharing

●output slew rate limiting for lower radiated emissions

●-120 Ohm CAN bus termination

●Decoded address range is configurable for BasicCAN and PeliCAN modes

●Ten pin right angled header standard as an I/O connector (DB-9 option available)

●Operating temperature range of -40°C to +85°C

●+5V power output on some models

RoHS compliant

CTIM-00043 (0.01) 1/15/2010	www.connecttech.com	5
	800-426-8979 519-836-1291