Connect Tech
Appendix A: iMPACT Instructions for FPGA Configuration
To configure the FPGA via JTAG, connect the JTAG programming cable to P2 ensuring that all JTAG signals align correctly. It is important to note that P2 also has the TRST signal on pin 1, which is not part of Xilinx’s Parallel or USB programming cables.
Launch Impact
1) Open iMPACT, and select create a new project
2)Select configure devices using boundary scan. iMPACT will scan the JTAG chain, and identify three devices. The first device will be the FPGA.
Revision 0.02 | 22 |
