CHANGING THE BELT (FIG. MM)
●Unplug your saw.
1.Loosen the three bolts (1) and remove the belt cover (2).
2.Loosen the set screw (3) with a 4 mm hex key and six hex screw (4) with a 5 mm hex key counterclockwise to move the motor forward.
3.Remove and replace the belt.
4.Lift the motor housing up and retighten the set screw (3).
5.Retighten the hex screws (4) clockwise. Do not overtighten.
6.Replace the belt cover and tighten all bolts.
Fig. MM
3
4
4 1
2
38