Your new table saw has been designed to give you many years of high quality performance. To insure this goal, proper care and treatment is important.
Careful treatment begins with removing all parts from the canon and checking them against the list of loose pans.
Your table saw is shipped complete in one carton and includes a leg stand, two table extensions, a rip fence, a miter fence with adjusting clamp, a blade guard, rails and hardware.
•Separate the saw and all parts from the packing materials and check each against the packing list, especially the small parts that can be hidden in the packing material.
Note: Do not discard the packing materials until you have carefully inspected the saw, identified all parts, and satisfactorily operated your new saw.
If you are missing a part, check the packaging before contacting Sears.
If any parts are missing, do not attempt to assemble your table saw, plug in the power cord, or turn the switch on until the missing parts are obtained and are installed
correctly. Complete parts lists are lecated at the end of this manual. Use these lists to identify the part number of any missing part. Contact your Sears Service Center or Retail store and get the missing part(s) before assembling and trying to use your saw.
A WARNING: Never use gasoline, naptha, or other highly volatile solvents. Do not ever let brake fluids, gasoline,
A WARNING: To prevent accidental starting that could cause possible serious personal injury, assemble all parts to your saw before connecting it to power supply. Saw should never be connected to power supply when you are assembling parts, making adjustments, installing or removing blades, or when not in use.
_1, WARNING: If any parts are missing, do not operate this tool until the missing parts are
replaced. Failure to do so could result in possible serious personal injury.
The following recommended accessories are currently available at Sears Retail Stores.
Item No.
Item No.
Item No.
Item No.
Item No.
Item No.
Item No.
Item No.
Item No.
Item No.
Item No.
Router Mounting Kit | _1, WARNING: To avoid risk of injury, use |
Miter Slot Table | recommended dado and zero clearance throat |
Ze_'oClearance Throat Plate | plate when employing a dado accessory. |
Dado Throat Plate |
|
Quick Fold Table | DO NOT USE 7 in. WOBBLE DADOES |
Wide Table Kit | |
Long Miter/Rip Fence | A complete assortment of blades for your saw are | ||
Air Floatation | Table | ||
available at your nearest Sears Retail Store. | |||
Wide Table Leg Set | |||
| |||
Miter Clamp | Kit |
| |
,_, WARNING: The use of attachments or accessories not listed might be hazardous.
9 | rRRFTSMIIN" TABLESAW315.228110 |
