Cypress manual CTM-130/132 Accessories

Power cable

A standard 4m (12’) length Cable is provided with the modem. Different lengths are available – contact your dealer or Cypress Solutions Inc.

5.3 CTM-130/132 Accessories

Serial data cable

A serial data cable is required to connect the modem to your computer or other host device. A standard DB9 male (modem end) to DB9 Female (PC end), of length 2m (6’) is available - contact your dealer or Cypress Solutions Inc.

Cell Antenna

A dual band (800MHz and 1900MHz bands) magnetic mount 3dBi whip antenna with 3m (10’) cable fitted with SMA connector is available. Other mounting options and types are available - contact your dealer or Cypress Solutions Inc.

I/O Connector

The CTM-130/132 offers Input monitoring and Output control of external devices. Connection to these is via a 3.81mm pitch 14 position industrial connector. These can be provided by Cypress Solutions or are available from many component suppliers. Part numbers of suitable connectors are:

Phoenix Contact	part # MC 1.5/14-ST-3.81 (available form Digi-Key)
Wieland	part # 25.620.4453.0
Digikey (OST)	part # ED1971-ND

AC/DC power supply

A 120VAC, 60Hz to 12VDC 500mA power supply to power the Chameleon modem when it is not powered directly from a 12 or 24 volt source can be purchased - contact your dealer or Cypress Solutions Inc.

GPS antenna

A magnetic mount low profile antenna with 5 metre (16’) coax cable and MCX connector is available for direct connection to the CTM-132 modem. The antenna must be an active type suitable for 3.3VDC bias GPS receivers. Other mounting options and types are available - contact your dealer or Cypress Solutions Inc.

© 2007 Cypress Solutions Installation and Operation Manual: CTM-130 / CTM-132 (Revision 1.2) Page - 9 -