8.1.8 Setup Input Reporting
Input reports may be triggered by Input events and may be sent to a remote location over the wireless connection and over the local serial connection to the host computer. Up to 4 Input triggered reports may be independently configured using the embedded web pages. These reports may be triggered by a combination of time AND/OR Input event.
A further 4 Input reports may be configured using AT Commands as well as more complex report triggering sequences for all 8 reports – refer to the AT Command reference for details.
Each report may be configured to include up to 4 independent messages. These messages come in either NMEA, ULCP, or TAIP format. Refer to the AT Command reference document for details of the message formats.
© 2007 Cypress Solutions | Installation and Operation Manual: | Page - 24 - |
