Front Panel Display, Power, Internet | D-Link DSL-2740B guide

DSL-2740B Wireless ADSL Router User Guide

Front Panel Display

Place the Router in a location that permits an easy view of the LED indicators on the front panel.

The LED indicators on the front panel include Power, LAN 1-4, WLAN, DSL, and Internet. The LAN, WLAN, and Internet indicators monitor link status and activity.

	Power		Steady green light indicates the unit is powered on. When the device is
	Power		powered off this remains dark.
			powered off this remains dark.

	LAN		A solid green light indicates a valid link on startup. These lights blink when
	LAN		there is activity currently passing through the Ethernet port.


	WLAN		Steady green light indicates a wireless connection. A blinking green light
	WLAN		indicates activity on the WLAN interface
			indicates activity on the WLAN interface

	DSL		Steady green light indicates a valid ADSL connection. This will light after the
	DSL		ADSL negotiation process has been settled. A blinking green light indicates
			activity on the WAN (ADSL) interface.

	Internet		Steady green light indicates a successful Internet connection. Steady red
	Internet		light indicates failed Internet connection. Dark if no WAN protocol is
			configured.

4

Image 14

D-Link DSL-2740B manual Front Panel Display, Power, Internet

Contents

DSL-2740B WirelessADSL2+ Router User Guide CE Mark Warning FCC Warning Table Of Contents Save / REBOOTt 104 About This User Guide Installation OverviewSetup Wizard Installation Notes Packing List Additional Software Radius server Port Security ProtocolIP Address Key LAN Subnet Mask for LAN IP addresses forDSL-2740B Ethernet NIC 802.11n-draft Wireless Router Description and Operation Router Features Standards Compatibility and Compliance Internet PowerFront Panel Display Rear Panel Connections Connect network cables Radio Setting Up a Wireless NetworkWireless Security Range Location and Wireless Operation Power on Router Factory Reset Button Connect Router to Ethernet Hub or Switch to Router ConnectionConnect Adsl Line Computer to Router Connection DSL-2740B Wireless Adsl Router User Guide Configuring IP Settings on Your Computer Configuration Summary Enter Password Access the Configuration ManagerLogin to Home Configure the Router Web Manager First Time Log On Using the Setup Wizard WAN Settings PVC Settings Wizard Using the Setup Wizard WAN Settings Choose Connection Type DSL-2740B Wireless Adsl Router User Guide Using the Setup Wizard For PPPoE/PPPoA connection PPP IP extension Enable PPP Debug ModeDial on demand Use Static IP Address Using the Setup Wizard For Dynamic IP 1483 Bridge connection Select the specific Connection Type and Encapsulation Mode Using the Setup Wizard For Static IP Address IPoA connection Using the Setup Wizard For Bridge Mode connections Using the Setup Wizard For LAN Settings Using the Setup Wizard For Wireless LAN Settings Using the Setup Wizard Finish and Restart Adsl Virtual Circuit Service Category ATM SettingsAdsl Settings Window Firewall Router SettingsDefault Route Primary DNS Address Wlan Settings Window Wlan LAN LAN Settings Window UPnP Igmp Snooping DNS Configuration window DNSPage Tools Status SetupAdvanced Advanced Adsl Advanced Adsl Window Advanced Wlan Advanced Wlan Window Wlan Security WEP 802.1x Wlan Security Window WEP WPA-PSK Wlan Security Window WPA Wi-Fi Protected Access Wlan Security Window WPA-PSK Wlan Filter Wlan Security Window WPA Wlan Bridge Wlan Filter Window Wlan Bridge Window Wlan QOS Wlan QoS Window Firewall Firewall Window Virtual Server External Port Start/End Port TriggeringServer IP Address Protocol Port Triggering Window DMZ Window DMZOpen Protocol Opened protocol for remote users Outgoing IP Filter Outgoing IP Filter Window Incoming IP Filter Bridge Filter Incoming IP Filter Window Bridge Filter Window Parent Control URL Filter Parent Control Window Quality of Service URL Filter Window Quality of Service Window Routing RIP Routing Window RIP Parameters Description RIP Window Version Port MappingInterface Operation Port Mapping Window Port Mapping Window Diagnostics Window Tools Backup Settings Backup Settings window Update Settings Window Update SettingsRestore Default Restore Default Window TR069 Client Snmp Configuration TR-069 Client Window Snmp Configuration Window Ddns Ddns Window Time Access Service Time Window Access Service Window Access IP Password Window PasswordAccess IP Window Update Firmware Save / REBOOTt Save / Reboot Window Device Info Device Info window Adsl Window WAN LAN Window ATM WAN Window Route ATM Window ARP Route Window Dhcp Clients ARP Window Wlan Station Dhcp Clients window System LOG Wlan Station Window System Log Category Parameters System LOG windowPage System LOG window Technical Specifications Adsl Standards ADSL2 Standards Watts max Input 120V AC 60HzOutput 12V AC, 1200mA To 40C Wireless Configure Windows XP for Dhcp Control Panel Click Network and Internet Connections Click Network Connections Click Properties Select Obtain an IP address Configure Windows 2000 for Dhcp Windows Windows 95 and Windows Configure Windows 95 and Windows 98 for DhcpConfigure Windows ME for Dhcp Windows ME Configure Windows NT 4.0 for Dhcp Windows NT 4.0 Workstations In-Line Filter In-line low pass filter Three Port Filter Port Filter