Rear Panel Connections
All cable connections to the Router are made at the rear panel. Connect the power adapter here to power on the Router. Use the Reset button to restore the settings to the factory default values in the next chapter for instructions on using the reset button).
Connect network cables:
1.Insert the ADSL (telephone) cable included with the Router into the ADSL port and then connect the cable to your telephone line.
2.Insert one end of the Ethernet cable into one of the LAN ports on the back panel of the Router and the other end of the cable to an Ethernet Adapter or available Ethernet port on your computer.
Antenna
For wireless operation, mount the antenna on the threaded antenna post.
Note
ADSL port
Use the ADSL cable to connect to the your telephone line
Ethernet ports
Use the Ethernet ports to connect the Router to your Ethernet LAN or Ethernet devices
To manually reboot the Router, disconnect and then reconnect the power.
Reset button
To manually reset, depress button with the power on for at least seven seconds
Power insert | Power button |
Use the adapter | Push in to |
shipped with the | the Router. Push |
Router to connect | again to |
to power source | the Router |
Using a power supply with a different voltage rating will damage the device and void
WARNING! the warranty of this product.
5
