Setup menu
Preference > Audio Setting
Follow the same procedure as ÔVideoÕ Settings to select ÔAudioÕ Settings.
Preference
Video
Audio
Parental Control
Change Password
Auto Setting
VCR
ENTER Confirm | MENU Back | SETUP Exit |
Digital Output
1Use [ENTER] to select ÔDigital OutputÔ while the ÔAudioÕ submenu is displayed.
2Press [ENTER] or [Ã] to go to the second level.
3Use [É ] to select the desired digital output
type.
Preference > Audio
|
|
|
| Digital Output | Bitstream |
| Dynamic | Ã PCM |
|
|
|
ENTER Confirm | MENU Back | SETUP Exit |
4Press [ENTER] to confirm your selection.
5Press [SETUP] to exit the menu.
Bitstream
Select when connected to a Dolby Digital or DTS decoder (or an amplifier or other equipment with a Dolby Digital or DTS decoder).
PCM
Select when connected to a 2 channel digital stereo amplifier. The DVD Recorder + VCR's digital audio signal will be output in the PCM 2ch format when you play a DVD recorded with a Dolby Digital (only for DVD) or MPEG soundtrack. If the DVD is recorded with a DTS sound track then no sound will be heard.
Dynamic Range
While watching DVD movies, you may wish to compress the dynamic range of the audio output (the difference between the loudest and quietest passages). This allows you to listen to a movie at a lower volume without losing clarity of sound.
Set ÔDynamicÔ to ÔFullÕ, ÔMiddleÕ or ÔOffÕ for this effect. Follow the same procedure as ÔDigital OutputÔ to set the ÔDynamicÕ.
Preference > Audio
| Digital Output | Full |
|
| ||
|
|
|
|
|
|
|
| Dynamic |
|
| Middle |
|
|
|
|
|
| Ã Off |
| SETUP |
|
|
|
|
|
| |
|
|
|
|
|
|
|
ENTER Confirm | MENU Back | SETUP Exit |
| |||
|
|
|
|
|
|
|
25
