Timer Recording
Canceling a Timer Recording |
| Timer Recording Troubleshooting |
| ||
|
You can clear a Timer Recording any time before the recording actually starts.
¥Use [É ] to select the program you want to erase on the Timer Recorder List, then press
[ENTER] to modify it. Use [É ] to select 'Delete' then press [ENTER].
Stopping a Timer Recording in Progress
After a Timer Recording has started, you can still cancel the program by pressing [STOP]. To confirm, select ÔOKÕ. To cancel, select ÔCancelÕ.
¥The Timer indicator lights on the front panel display when the DVD Recorder + VCR is ready for the Timer Recording.
¥The timer indicator will flash if any of the following conditions occur;
-Empty or
-When you go into Main Browser, SETUP, Timer Recording menu after Timer Recording setup.
-When you record the TV signal after Timer Recording setup.
-When you play titles after Timer Recording setup.
¥The DVD Recorder + VCR will automatically power off when the Timer Recording ends.
¥There is a short delay when a timer recording finishes to confirm the recorded program. If two timer recordings are set to record sequentially (one right after the other), the very beginning of the later program may not be recorded.
Even if a Timer Recording is set, the DVD Recorder + VCR will not record if:
¥A protected disc is in the tray; see ÔDiscÕ settings on a page 31.
¥There are already 49 titles recorded on the disc.
You cannot enter a Timer Recording if:
¥A recording (copying) or playing titles is already under way.
¥The start time has already passed.
¥16 Timer Recordings have already been set.
If two or more Timer Recordings overlap:
¥ Two or more Timer Recordings are overlapped.
If the disc is damaged, the recording may not complete successfully.
Recording Priority
¥Timer Recording and OTR (One Touch Record) have the same priority but they have lower priority than manual recording. During manual recording, Timer Recording or OTR will be ignored.
50
