VCR Playback
Before You Begin |
| Tracking Control |
|
1Press the [VCR] button to set the remote control to operate the VCR deck.
2Turn the TV on and select the video input source connected to the DVD Recorder+VCR.
Audio system: Turn the external audio system on and select the input source connected to the DVD Recorder+VCR.
Auto Tracking
The automatic tracking function adjusts the picture to remove snow or streaks. It works in the following cases:
¥When a tape is played for the first time.
¥When the tape speed (SP, LP) changes.
¥When streaks or snow appear because of scratches on the tape.
Playing a VHS Tape
1Insert a prerecorded video cassette.
If the DVD Recorder+VCR is powered off, it will power on automatically.
Make sure the TIMER indicator on the front panel display is not lit. If it is, press [POWER] once.
If a tape without a safety tab is inserted, the DVD Recorder+VCR will start playback automatically.
If the DVD Recorder+VCR is powered on by inserting a video cassette with a safety tab, playback will not start automatically.
2Press [PLAY].
The PLAY icon appears on the TV screen. It is not necessary to select the tape speed (SP, LP) for playback. It will be automatically selected by the DVD Recorder+VCR.
3Press [STOP] to stop playback.
The STOP icon appears on the TV screen. If the tape reaches the end before [STOP] is pressed, the DVD Recorder+VCR will automatically stop and rewind.
Manual Tracking
If noise appears on the screen during playback, press the [TRACKING
¥If vertical jitter occurs, adjust these controls very carefully.
¥Tracking is automatically reset to normal when the tape is ejected or the power cord is unplugged for more than 3 seconds.
PLAYBACK
35
