HP XP24000 3 Using the Volume Security GUI, The Volume Security Window

3 Using the Volume Security GUI

This chapter explains Volume Security window and dialog boxes.

The Volume Security Window

The Volume Security window (Figure 4) appears when you start Volume Security. This window is the starting point for all the Volume Security operations.

To start the Volume Security software:

1.Log on to the disk array to open the Remote Web Console main window. For details, see the HP StorageWorks XP24000/XP20000 Remote Web Console User’s Guide.

2.Click Go, Mainframe Connection, and then select Volume Security on the menu bar of the Remote Web Console main window.

•To make security settings and apply the settings, you must use a user account that has the write permission (For example, the Administrator account). If you use a user account that does not have the write permission, you will be able to view security settings but will neither be able to make security settings nor apply security settings.

•To set security using Volume Security, you must make sure that Remote Web Console is in Modify mode. For detailed information on how to do this, see the HP StorageWorks XP24000/XP20000 Remote Web Console User’s Guide.

Figure 4 shows the Volume Security window when a Security Group belonging to an LDKC is selected.

XP24000/XP20000 Volume Security User's Guide 15