HP XP24000 The LDEV to Security Group Dialog Box

Figure 18 The Host Group to Port Dialog Box

Item	Description
LDKC	Indicates the number of the selected LDKC.
	Provides information about a host group, where the number groups, from left to right,
	indicate:
	• First: The Type/Model the type and model number of a host (or a channel extender).
Host Group	• Second: The Node ID of a host (or a channel extender).
	• Third: The Logical Partition Number of the host.
	• Fourth: The vendor of the host. Vendors include FJT (Fujitsu), IBM, HTC (Hitachi), and
	CNT(Ex). If CNT(Ex) appears, the table row indicates the type, model number, and
	node ID of a channel extender.
Port table	Lists ports that are available and registered.
OK	Closes the dialog box.

The LDEV to Security Group Dialog Box

The LDEV to Security Group dialog box (Figure 19) appears when you do either of the following in the Volume Security window (Figure 4):

•when you right-click a volume from the lower right table and then select LDEV to Security Group from the pop-up menu.

•when you right-click an item in the tree view and then select List -> LDEV to Security Group from the pop-up menu. The List -> LDEV to Security Group pop-up command does not display if you double-click a security group and then right-click a host group or LDEV group from immediately below the security group.

This dialog box enables you to specify a volume and then displays security groups in which the volume is registered (see “Locating Security Groups that Contain a Specified Volume” on page 45).

XP24000/XP20000 Volume Security User's Guide 37