3.0Introduction
This chapter explains how to connect your printer and load media.
3.1Connecting the Printer
Connect the communication cable’s RJ12 connector to the printer and the other end to the host. Connect the one end of the power supply to the back of the printer and the other end to a properly grounded outlet. Once the power supply has been connected the printer will automatically power up.
Warning: DO NOT connect this printer to any type of telephone line or telephone equipment. See Appendix C for more information.
Note: Contact your dealer for special cables to connect your Palm OS handheld device to the
Host |
Printer
AC Outlet
5 |
