4.4Connecting to an ESC POS Terminal
The default configuration of your printer is Windows/Epson 24 pin. You will have to change the emulation type to ESC POS to work with your ESC POS Terminal. Check your Terminal communication parameters and change the printer settings to match your terminal settings.
Default Communication parameters
Speed: | 57600 baud |
Data: | 8 bits |
Parity: | None |
Control: | Hardware |
To check the current emulation and communication parameters of your printer:
1.Make sure that a roll of paper is loaded, (not label media).
2.Set the printer to the Off line mode.
3.Press both buttons simultaneously until the configuration is printed.
If the configuration is not correct see section 4.4 Changing the Default Settings.
18 |
|
